top of page

Testing

Task to complete:

This sheet will record testing that you have carried out, why you did it, what you found out and any recommendations (this must include receiving feedback from your client). You testing will be based upon certain aspects of your product that you need to model and see if it works, Testing could be based upon material properties, moving parts, form or any other identified aspects.

Teacher Instruction:

Slide1.JPG

Watch the following tutorial where you will be talked through what you need to do

Checkpoints:

  • Have you stated what you have done, why and what you have found out?

  • Is your testing relevant and does it inform your design?

  • Have you received feedback from your client?

  • Do you need to develop your idea further?

GAP Attainment:

Use the following table to understand what potential grade of work you will produce. Try to aim for the top grade!

GREEN- Grades D-E

You will have tested during your development. You will have evaluated the outcomes.

AMBER- Grades B-C

You will have tested during your development. You will have justified the need for the tests and evaluated the outcomes.

PINK- Grades A*-A

You will have tested as an ongoing process during your development. You will have justified the need for the tests and evaluated the outcomes.

Additional Resources:

TE1
TE1

press to zoom
TE5
TE5

press to zoom
TE3
TE3

press to zoom
TE1
TE1

press to zoom
1/5
bottom of page